Aircraft EMC testing

Airbus in Germany chooses Sentinel 3 RF over fibre system

Airbus Defence & Space Madrid

Airbus in Germany chooses Sentinel 3 RF over fibre system

PPM are pleased to announce that another European Airbus site has chosen Sentinel 3. Airbus Defence and Space headquarters in Ottobrunn, near Munich have chosen to integrate the Sentinel 3 RF over fibre system to their data acquisition platform. Continue reading

Posted in Aircraft EMC testing, News | Comments Off on Airbus in Germany chooses Sentinel 3 RF over fibre system

PPM deliver Sentinel 3 system to BAE Warton

Tornado aircraft BAE Warton

PPM deliver Sentinel 3 system to BAE Warton

BAE Systems in Warton, UK have taken delivery of a Sentinel 3 system to support their electromagnetic compatibility (EMC) testing. The Lancashire site is a major BAE assembly and testing facility and the main manufacturing location for the Eurofighter Typhoon. Continue reading

Posted in Aircraft EMC testing, News, RF over fibre, Sentinel | Comments Off on PPM deliver Sentinel 3 system to BAE Warton

National Institute for Aviation Research chooses Sentinel 3

Sentinel 3 System vector

NIAR chooses Sentinel 3 for lightning and HIRF testing

The National Institute for Aviation Research (NIAR) at Wichita State University has chosen Sentinel 3 RF over fibre to support their environmental and electromagnetic testing on aircraft. NIAR’s Environmental & EME Test Labs perform testing such as Lightning Transient Analysis and HIRF testing. Continue reading

Posted in Aircraft EMC testing, News, Sentinel | Comments Off on National Institute for Aviation Research chooses Sentinel 3

Aircraft EMC testing with Fibre Optic Links – part 4: Practical aspects to consider

The requirements of a FOL system vary depending on whether low or high level testing is being conducted. For example, when conducting LLSC/LLSF measurements on an aircraft immersed in a low-level field, very low levels of current or voltage are … Continue reading

Posted in Aircraft EMC testing, News | Comments Off on Aircraft EMC testing with Fibre Optic Links – part 4: Practical aspects to consider

Aircraft EMC testing with Fibre Optic Links – part 3: Lightning Testing

Lightning Testing Aircraft lightning testing is concerned with two aspects of the direct attachment of lightning to the aircraft: Direct damage, including fuel explosion Induced electrical transients causing upset or damage to critical electronic systems, known as indirect effects. Direct … Continue reading

Posted in Aircraft EMC testing, News | Comments Off on Aircraft EMC testing with Fibre Optic Links – part 3: Lightning Testing

Aircraft EMC testing with Fibre Optic Links – part 2: HIRF Testing

HIRF Test Methodology The final stage of aircraft clearance may involve limited illumination of the aircraft with threat level RF fields, typically over the range 10 kHz – 18 GHz. As an alternative approach, with lower facility costs than for … Continue reading

Posted in Aircraft EMC testing, News | Comments Off on Aircraft EMC testing with Fibre Optic Links – part 2: HIRF Testing

Aircraft EMC testing with Fibre Optic Links – part 1

Avoiding instrumentation interference and signal losses at high frequencies As part of an aircraft’s certification for flight, aircraft must demonstrate safe operation within a range of environmental conditions. This includes Electromagnetic Environmental Effects (E3) which, for civil aircraft, include High … Continue reading

Posted in Aircraft EMC testing, News | Comments Off on Aircraft EMC testing with Fibre Optic Links – part 1