A high voltage pulse/high power microwave (HPM) attenuator that contains a liquid dielectric coolant. It has an integral coolant pump, heat exchanger, and fan, which enables this unit to dissipate high average power.
- High voltage pulse rated
- 200 Watt average input power
- For use with high rep rate pulses
|Maximum Input||7kV/400ns, l5kV/75ns, 30kV/15ns, 60kV/2ns FWHM Pulse|
|Peak Input Power||72MW at rated pulse width|
|Average Input Power||200W maximum|
|Impedance||50Ω ±1% (output terminated with 50Ω)|
|Risetime through Unit||< 30ps|
|Bandwidth (-3dB)||DC to > 10Ghz|
|Reflection-TDR||< 5% to a 100ps risetime step function|
|Voltage Coefficient||< 1% at 25kV|
|Connector||** HNB female *|
|Dimensions inches (cm)||Approx. 5 (12.7) Wide x 6 (15.3) High x 12 (30.5) Deep|
|Weight||Approx. 17 lbs. (7.8 kg)|
|Power Requirements||115V/60Hz, 4 Amp to power cooling pump, fan and highly visible|
* Our type HN (HNB) connectors are specially designed to obtain minimum reflection
coefficient for fast risetimes. For best pulse response, our model 401-HNB male or
402-HNB female cable connector for RG214/U coax should be used for interconnection.
** Unit is supplied with a Barth Model 404-HMM low reflection male to male adapter,
so that either the input or output can be a male connector.