The PRODYN models SD-S10 and SD-S30 sensors are qs or D. sensors that are equivalent AFWL Models HSD-SI and HSD-S3 respectively. These sensors can be used as D-DOT sensors or they can be used to measure the time rate-of-change of surface current density. The sensor consists of a hemispherical dome supported above a metal mounting surface by a dielectric ring.
- No external power source required
- Equipped for purging with a gas such as dry air, nitrogen or SF6
|Equivalent Area (Aeq)||Frequency Response (3 dB point)||Risetime (tr 10 - 90)||Maximum Output (peak)||Output Connector (s)||Mass||L x W x H (cm) - see outline||t (cm) - see outline|
|SD-S10||1 x 10-1 m²||>130 MHz||> 2.7 ns||+ 4 kV||GR 874-L-50||1.6 kg||36.8 x 10.9 x 28.2||0.3|
|SD-S30||1 x10-2 m²||>350 MHz||< 1.0 ns||+ 4 kV||GR 874-L-50||1.4 kg||22.1 x 3.8 x 13.7||0.2|